All-solution-processed ultraflexible wearable sensor enabled with universal trilayer structure for organic optoelectronic devices.

All-solution-processed organic optoelectronic devices can enable the large-scale manufacture of ultrathin wearable electronics with integrated diverse functions. However, the complex multilayer-stacking device structure of organic optoelectronics poses challenges for scalable production. Here, we establish all-solution processes to fabricate a wearable, self-powered photoplethysmogram (PPG) sensor. We achieve comparable performance and improved stability compared to complex reference devices with evaporated electrodes by using a trilayer device structure applicable to organic photovoltaics, photodetectors, and light-emitting diodes. The PPG sensor array based on all-solution-processed organic light-emitting diodes and photodetectors can be fabricated on a large-area ultrathin substrate to achieve long storage stability. We integrate it with a large-area, all-solution-processed organic solar module to realize a self-powered health monitoring system. We fabricate high-throughput wearable electronic devices with complex functions on large-area ultrathin substrates based on organic optoelectronics. Our findings can advance the high-throughput manufacture of ultrathin electronic devices integrating complex functions.

High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer.

High performance organic solar cells (OSCs) are usually realized by using post-treatment and/or additive, which can induce the formation of metastable morphology, leading to unfavorable device stability. In terms of the industrial production, the development of high efficiency as-cast OSCs is crucially important, but it remains a great challenge to obtain appropriate active layer morphology and high power conversion efficiency (PCE). Here, efficient as-cast OSCs are constructed via introducing a new polymer acceptor PY-TPT with a high dielectric constant into the D18:L8-BO blend to form a double-fibril network morphology. Besides, the incorporation of PY-TPT enables an enhanced dielectric constant and lower exciton binding energy of active layer. Therefore, efficient exciton dissociation and charge transport are realized in D18:L8-BO:PY-TPT-based device, affording a record-high PCE of 18.60% and excellent photostability in absence of post-treatment. Moreover, green solvent-processed devices, thick-film (300 nm) devices, and module (16.60 cm2) are fabricated, which show PCEs of 17.45%, 17.54%, and 13.84%, respectively. This work brings new insight into the construction of efficient as-cast devices, pushing forward the practical application of OSCs.

Electron injection and defect passivation for high-efficiency mesoporous perovskite solar cells.

Printable mesoscopic perovskite solar cells (p-MPSCs) do not require the added hole-transport layer needed in traditional p-n junctions but have also exhibited lower power conversion efficiencies of about 19%. We performed device simulation and carrier dynamics analysis to design a p-MPSC with mesoporous layers of semiconducting titanium dioxide, insulating zirconium dioxide, and conducting carbon infiltrated with perovskite that enabled three-dimensional injection of photoexcited electrons into titanium dioxide for collection at a transparent conductor layer. Holes underwent long-distance diffusion toward the carbon back electrode, and this carrier separation reduced recombination at the back contact. Nonradiative recombination at the bulk titanium dioxide/perovskite interface was reduced by ammonium phosphate modification. The resulting p-MPSCs achieved a power conversion efficiency of 22.2% and maintained 97% of their initial efficiency after 750 hours of maximum power point tracking at 55 ± 5°C.

Waterproof and ultraflexible organic photovoltaics with improved interface adhesion.

Ultraflexible organic photovoltaics have emerged as a potential power source for wearable electronics owing to their stretchability and lightweight nature. However, waterproofing ultraflexible organic photovoltaics without compromising mechanical flexibility and conformability remains challenging. Here, we demonstrate waterproof and ultraflexible organic photovoltaics through the in-situ growth of a hole-transporting layer to strengthen interface adhesion between the active layer and anode. Specifically, a silver electrode is deposited directly on top of the active layers, followed by thermal annealing treatment. Compared with conventional sequentially-deposited hole-transporting layers, the in-situ grown hole-transporting layer exhibits higher thermodynamic adhesion between the active layers, resulting in better waterproofness. The fabricated 3 µm-thick organic photovoltaics retain 89% and 96% of their pristine performance after immersion in water for 4 h and 300 stretching/releasing cycles at 30% strain under water, respectively. Moreover, the ultraflexible devices withstand a machine-washing test with such a thin encapsulation layer, which has never been reported. Finally, we demonstrate the universality of the strategy for achieving waterproof solar cells.

Dimension Tuning of All-Inorganic Ag-Based Metal Halides by Solvent Engineering.

Dimension growth of metal halides is important for its properties and applications. However, such dimension control of the metal halides is rarely reported in the literature and the growth mechanism is not clear yet. A minute difference of solvent properties can tremendously alter the process of nucleation and growth of crystals. Herein, an intriguing phenomenon of dimension tuning for Ag-based metal halides is reported. The 1D Cs2 AgCl3 crystals can be obtained in pure DMF while the 2D CsAgCl2 crystals are obtained in pure DMSO. Both exhibit bright yellow emission, which are derived from self-trapping excitons (STEs). The photoluminescence quantum yield (PLQY) of Cs2 AgCl3 (1D) and CsAgCl2 (2D) are 28.46 % and 20.61 %, respectively. In order to understand the mechanism of the dimension change, additional solvents (N,N-dimethylacetamide, DMAC, 1,3-Dimethyl-Tetrahydropyrimidin-2(1H)-one, DMPU) are also selected to process the precursor for crystal growth. By comparing the functional group, dielectric constant, and donor number among the four solvents, we find the donor number plays the predominant role in nucleation process for Cs2 AgCl3 and CsAgCl2 . This research reveals the relationship between coordination ability of the solvent and the dimension of metal halides.

Lipidomic markers for the prediction of progression from mild cognitive impairment to Alzheimer's disease.

Dementia is a well-known syndrome and Alzheimer's disease (AD) is the main cause of dementia. Lipids play a key role in the pathogenesis of AD, however, the prediction value of serum lipidomics on AD remains unclear. This study aims to construct a lipid score system to predict the risk of progression from mild cognitive impairment (MCI) to AD. First, we used the least absolute shrinkage and selection operator (LASSO) Cox regression model to select the lipids that can signify the progression from MCI to AD based on 310 older adults with MCI. Then we constructed a lipid score based on 14 single lipids using Cox regression and estimated the association between the lipid score and progression from MCI to AD. The prevalence of AD in the low-, intermediate- and high-score groups was 42.3%, 59.8%, and 79.8%, respectively. The participants in the intermediate- and high-score group had a 1.65-fold (95% CI 1.10 to 2.47) and 3.55-fold (95% CI 2.40 to 5.26) higher risk of AD, respectively, as compared to those with low lipid scores. The lipid score showed moderate prediction efficacy (c-statistics > 0.72). These results suggested that the score system based on serum lipidomics is useful for the prediction of progression from MCI to AD.

Glutathione and Esterase Dual-Responsive Smart Nano-drug Delivery System Capable of Breaking the Redox Balance for Enhanced Tumor Therapy.

Conventional chemotherapy usually fails to achieve its intended effect because of the poor water solubility, poor tumor selectivity, and low tumor accumulation of chemotherapy drugs. The systemic toxicity of chemotherapy agents is also a problem that cannot be ignored. It is expected that smart nano-drug delivery systems that are able to respond to tumor microenvironments will provide better therapeutic outcomes with decreased side effects of chemotherapeutics. Nano-drug delivery systems capable of breaking the redox balance can also increase the sensitivity of tumor cells to chemotherapeutics. In this study, using polymer-containing disulfide bonds, ester bonds, and d-α-tocopherol polyethylene glycol succinate (TPGS), which can amplify reactive oxygen species (ROS) in tumor cells, we have successfully prepared a smart glutathione (GSH) and esterase dual-responsive nano-drug delivery system (DTX@PAMBE-SS-TPGS NPs) with the ability to deplete GSH as well as amplify ROS and effectively release an encapsulated chemotherapy drug (DTX) in tumor cells. The potential of DTX@PAMBE-SS-TPGS NPs for enhanced antitumor effects was thoroughly evaluated using in vitro as well as in vivo experiments. Our research offers a promising strategy for maximizing the efficacy of tumor therapy.

High Conductivity, Semiconducting, and Metallic PEDOT:PSS Electrode for All-Plastic Solar Cells.

Plastic electrodes are desirable for the rapid development of flexible organic electronics. In this article, a plastic electrode has been prepared by employing traditional conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and plastic substrate polyethersulfone (PES). The completed electrode (Denote as HC-PEDOT:PSS) treated by 80% concentrated sulfuric acid (H2SO4) possesses a high electrical conductivity of over 2673 S/cm and a high transmittance of over 90% at 550 nm. The high conductivity is attributed to the regular arrangement of PEDOT molecules, which has been proved by the X-ray diffraction characterization. Temperature-dependent conductivity measurement reveals that the HC-PEDOT:PSS possesses both semiconducting and metallic properties. The binding force and effects between the PEDOT and PEI are investigated in detail. All plastic solar cells with a classical device structure of PES/HC-PEDOT:PSS/PEI/P3HT:ICBA/EG-PEDOT:PSS show a PCE of 4.05%. The ITO-free device with a structure of Glass/HC-PEDOT:PSS/Al4083/PM6:Y6/PDINO/Ag delivers an open-circuit voltage (VOC) of 0.81 V, short-circuit current (JSC ) of 23.5 mA/cm2, fill factor (FF) of 0.67 and a moderate power conversion efficiency (PCE) of 12.8%. The above results demonstrate the HC-PEDOT:PSS electrode is a promising candidate for all-plastic solar cells and ITO-free organic solar cells.

Improved Molecular Ordering in a Ternary Blend Enables All-Polymer Solar Cells over 18% Efficiency.

Although all-polymer solar cells (all-PSCs) show great commercialization prospects, their power conversion efficiencies (PCEs) still fall behind their small molecule acceptor-based counterparts. In all-polymer blends, the optimized morphology and high molecular ordering are difficult to achieve since there is troublesome competition between the crystallinity of the polymer donor and acceptor during the film-formation process. Therefore, it is challenging to improve the performance of all-PSCs. Herein, a ternary strategy is adopted to modulate the morphology and the molecular crystallinity of an all-polymer blend, in which PM6:PY-82 is selected as the host blend and PY-DT is employed as a guest component. Benefiting from the favorable miscibility of the two acceptors and the higher regularity of PY-DT, the ternary matrix features a well-defined fibrillar morphology and improved molecular ordering. Consequently, the champion PM6:PY-82:PY-DT device produces a record-high PCE of 18.03%, with simultaneously improved open-circuit voltage, short-circuit current and fill factor in comparison with the binary devices. High-performance large-area (1 cm2 ) and thick-film (300 nm) all-PSCs are also successfully fabricated with PCEs of 16.35% and 15.70%, respectively.Moreover, 16.5 cm2 organic solar module affords an encouraging PCE of 13.84% when using the non-halogenated solvent , showing the great potential of "Lab-to-Fab" transition of all-PSCs.

Molecular Insights of Non-fused Ring Acceptors for High-Performance Non-fullerene Organic Solar Cells.

Non-fullerene acceptors with fused-ring structures have rapidly improved the performance of organic solar cells over the past five years, but they still suffer from synthetic complexity and thus high material costs, one of the major obstacles of hindering their commercialization process. The construction of non-fused ring acceptors (NFRAs) has recently been regarded as a feasible solution due to their facile synthesis and satisfactory device performances. Thus in this concept, we highlight the important progress of NFRAs in recent years, and discuss the key relationship between molecular design strategies and device performance. Finally, we provide some potential molecular insights for the future design of high-performance NFRAs.

Precursor Engineering to Reduce Processing Temperature of ZnO Films for Flexible Organic Solar Cells.

Sol-gel-derived ZnO is one of the most widely used electron-transport layers in inverted organic solar cells. The sol-gel ZnO precursor consists of zinc acetate dehydrate (ZAH) and ethanolamine dissolved in 2-methoxyethanol, where ethanolamine chelates with ZAH, which helps ZAH dissolve in the 2-methoxyethanol. However, an annealing temperature above 120 °C is required to convert the complexes into ZnO. High temperatures are incompatible with flexible plastic substrates such as polyethylene terephthalate. In this work, we report an amine-free recipe consisting of ZAH in methanol to prepare ZnO films. The complex formed in the amine-free precursor solution is methanol-solvated ZAH, which is simpler than that of the amine-containing precursor solution. The temperature required for converting the precursor complex into ZnO was reduced to 90 °C for the amine-free recipe. Low-temperature-processed ZnO can function efficiently as an electron-transport layer in both rigid and flexible inverted nonfullerene solar cells.

On the interface reactions and stability of nonfullerene organic solar cells.

Long-term stability is critical for organic solar cells (OSCs) for practical applications. Several factors affect the stability of OSCs, including materials stability, morphology stability of bulk-heterojunctions and interface stability. In this perspective, we focus on interface stability due to interfacial reactions between the emerging acceptor-donor-acceptor (A-D-A) type nonfullerene active layers and interfacial layers. The description covers the initial phenomena of interfacial instability, mechanism of interfacial reactions, and strategies adopted to suppress interfacial reactions between the nonfullerene active layers and interfacial layers. Methods to test and analyze the chemical instability of nonfullerene acceptors are also included. The C[double bond, length as m-dash]C vinyl linker between the donor moiety and acceptor moiety is chemically or photochemically reactive and is a weak point for interface stability. The interface stability of OSCs could be enhanced by reducing the reactivity of the C[double bond, length as m-dash]C vinyl linker or removing it directly, modifying the surface of interfacial layers, and developing other novel interfacial materials.

A New Diazabenzo[k]fluoranthene-Based D-A Conjugated Polymer Donor for Efficient Organic Solar Cells.

The development of wide-bandgap polymer donors having complementary absorption and compatible energy levels with near-infrared (NIR) absorbing nonfullerene acceptors is highly important for realizing high-performance organic solar cells (OSCs). Herein, a new thiophene-fused diazabenzo[k]fluoranthene derivative is successfully synthesized as the electron-deficient unit to construct an efficient donor-acceptor (D-A) type alternating copolymer donor, namely, PABF-Cl, using the chlorinated benzo[1,2-b:4,5-b']dithiophene as the copolymerization unit. PABF-Cl exhibits a wide optical bandgap of 1.93 eV, a deep highest occupied molecular level of -5.36 eV, and efficient hole transport. As a result, OSCs with the best power conversion efficiency of 11.8% are successfully obtained by using PABF-Cl as the donor to blend with a NIR absorbing BTP-eC9 acceptor. This work provides a new design of electron-deficient unit for constructing high-performance D-A type polymer donors.

Producing p-Doped Surface for Hole Transporting Layer-Free Nonfullerene Organic Solar Cells.

Hole transporting layer-free organic solar cells with simplified device structures are desirable for their mass production. In this work, a p-dopant of organic molybdenum peroxide (OMP) to dope nonfullerene active layers to produce p-doped surface on the active layer is adopted. The OMP can effectively dope widely used polymer donors of nonfullerene organic solar cells, i.e., PTB7-Th, PBDB-T, and even PBDB-T-2F that has a very deep highest occupied molecular orbital (HOMO) energy level of -5.47 eV. The doping mechanism lies in the strong oxidizing property of peroxide groups of the OMP leading to superior doping properties. In the end, hole transporting layer-free nonfullerene organic solar cells with the device structure of ITO/PEI-Zn/PBDB-T-2F:IT-4F/Ag are fabricated. The cells show a power conversion efficiency of 12.2% and good thermal stability.

Ultrathin and Efficient Organic Photovoltaics with Enhanced Air Stability by Suppression of Zinc Element Diffusion.

Ultrathin (thickness less than 10 µm) organic photovoltaics (OPVs) can be applied to power soft robotics and wearable electronics. In addition to high power conversion efficiency, stability under various environmental stresses is crucial for the application of ultrathin OPVs. In this study, the authors realize highly air-stable and ultrathin (≈3 µm) OPVs that possess high efficiency (15.8%) and an outstanding power-per-weight ratio of 33.8 W g-1 . Dynamic secondary-ion mass spectrometry is used to identify Zn diffusion from the electron transport layer zinc oxide (ZnO) to the interface of photoactive layer; this diffusion results in the degradation of the ultrathin OPVs in air. The suppression of the Zn diffusion by a chelating strategy results in stable ultrathin OPVs that maintain 89.6% of their initial efficiency after storage for 1574 h in air at room temperature under dark conditions and 92.4% of their initial efficiency after annealing for 172 h at 85 °C in air under dark conditions. The lightweight and stable OPVs also possess excellent deformability with 87.3% retention of the initial performance after 5000 cycles of a compressing-stretching test with 33% compression.

54 cm2 Large-Area Flexible Organic Solar Modules with Efficiency Above 13.

Development of large-area flexible organic solar cells (OSCs) is highly desirable for their practical applications. However, the efficiency of the large-area flexible OSCs severely lags behind small-area devices. Here, efficient large-area flexible single cells with power conversion efficiency (PCE) of 13.1% and 12.6% for areas of 6 and 10 cm2 , and flexible modules with a PCE of 13.2% (54 cm2 ) based on poly(ethylene terephthalate)/Ag grid/silver nanowires (AgNWs):zinc-chelated polyethylenimine (PEI-Zn) composite electrodes are reported. The solution-processed flexible transparent electrode of AgNWs:PEI-Zn shows low surface roughness and good optoelectronic and mechanical properties. PEI-Zn is conductive and optically transparent. It can adhere to and wrap the AgNWs under electrostatic interaction between the negatively charged surface (AgNWs) and positively charged protonated amine groups (in PEI-Zn). It wraps the AgNWs networks and fills the void space to achieve a smooth surface. The flexible electrode is validated in both flexible OSCs and flexible quantum-dots light-emitting diodes (QLEDs). Small-area flexible OSCs show a PCE of 16.1%, and flexible QLEDs show an external quantum efficiency of 13.3%. In the end, a flexible module is demonstrated to charge a mobile phone as a flexible power source (shown in Video S1, Supporting Information).

Significant Enhancement of Illumination Stability of Nonfullerene Organic Solar Cells via an Aqueous Polyethylenimine Modification.

Device stability under illumination is the main obstacle of nonfullerene (NF) organic solar cells for moving toward practical application. ZnO, a generally used electron-transporting layer in inverted cells, is prone to induce the decomposition of NF acceptors under illumination with air mass 1.5 (AM1.5) spectrum, resulting in poor device stability. Herein, we report an aqueous polyethylenimine (a-PEI) modification on the ZnO surface could significantly enhance the stability of the NF organic solar cells. After 1000 h of AM1.5 illumination, the efficiency of the cell without a-PEI modification degrades to 43% of its initial value, while the cell with a-PEI modification could maintain 75% of its initial efficiency. The a-PEI modification reduces the number of surface defects with reduced adsorbed oxygen ZnO surface, faster work function recovery kinetics after UV irradiation, and suppressed electron spin resonance response. The reduction of surface defects is beneficial to the stability of NF acceptors on ZnO and also device performance.

Surface doping of non-fullerene photoactive layer by soluble polyoxometalate for printable organic solar cells.

The non-fullerene photoactive layer (PTB7-Th:IEICO-4F) film is first immersed into a PMA solution to induce an effective surface p-type doping. An improved hole-collection and a high PCE of 11.37% was obtained, although the non-fullerene OSCs were without a commonly evaporated MoO3. This surface doping technique is an effective and feasible strategy for the printable electronics technology.

Robust metal ion-chelated polymer interfacial layer for ultraflexible non-fullerene organic solar cells.

Achieving high power conversion efficiency and good mechanical robustness is still challenging for the ultraflexible organic solar cells. Interlayers simultaneously having good mechanical robustness and good chemical compatibility with the active layer are highly desirable. In this work, we present an interlayer of Zn2+-chelated polyethylenimine (denoted as PEI-Zn), which can endure a maximum bending strain over twice as high as that of ZnO and is chemically compatible with the recently emerging efficient nonfullerene active layers. On 1.3 µm polyethylene naphthalate substrates, ultraflexible nonfullerene solar cells with the PEI-Zn interlayer display a power conversion efficiency of 12.3% on PEDOT:PSS electrodes and 15.0% on AgNWs electrodes. Furthermore, the ultraflexible cells show nearly unchanged power conversion efficiency during 100 continuous compression-flat deformation cycles with a compression ratio of 45%. At the end, the ultraflexible cell is demonstrated to be attached onto the finger joint and displays reversible current output during the finger bending-spreading.